Your Ad Here

Sabtu, 31 Desember 2011

Unix Tip: OPERATING ON MULTIPLE FILES

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3613 - December 31, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


OPERATING ON MULTIPLE FILES

Have you ever felt the need to perform a
set of operations on multiple files
simultaneously???

Here is a solution for that.

For instance, if it is required to perform
multiple operations like searching a string
(using grep), and executing an awk or perl
script etc, etc. on not just one file but a
set of files, use the following commands at
the unix prompt:

$<: foreach i (<file_list>)
? echo $i
? grep <search_pattern> $i > tmp
? awk -f awk_script tmp >> report
? ....
? ....
? end
$<:

The files list in the brackets can be either

* Specifically mentioned

* A unix variable which contains a list of
file names. For instance, the variable
"p" can be assigned all the files starting
with string "data" as follows:
set p = (data*)
Other examples are:
set g = `grep -l "Startpoint" * `
or
set all = *
(This assigns all file names in the current
directory to the variable "all" )

And its usage with the "foreach" command will
be as follows:

$<: foreach i ($all)
.....
.....
end

This tip generously supported by: lakshmi@virtualipgroup.com

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Jumat, 30 Desember 2011

Unix Tip: CHMOD THE SYSTEM

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3612 - December 30, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


CHMOD THE SYSTEM

Along the lines of:

D O N O T D O T H I S!

Reports from several admins have
been made that dangerous users
who obtain root for the first
time enable full access to the
entire system. They are using
the following command:

# chmod -R 777 /

If you feel you have any
dangerous users, please advice
them of the dangers of executing
such a command.


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Kamis, 29 Desember 2011

Unix Tip: EXECUTE SCRIPT FROM NETSCAPE

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3611 - December 29, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


EXECUTE SCRIPT FROM NETSCAPE

Do you want to execute a shell
script from your netscape
navigator ?

Go to EDIT>PREFERENCE>Applications
Edit or create an application
Choose the suffix (sh, csh)

Put "sh <%s" or "csh<%s" as application handler.

You can use the xtrem -e option
to get a intercacitive window shell into
your navigator.


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Rabu, 28 Desember 2011

Unix Tip: TASK ALERTS

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3610 - December 28, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


TASK ALERTS

Have you ever started a long
running task, and after some time
decide you want to be alerted
when it finishes?

Add this to your .bashrc:

function aldo { while ps -ao pid | grep -q " ${1}$"; do sleep 1 ; done;
echo $'\a'; }

Then find the pid of a long
running process(say 253) and
on a different terminal:

501$ aldo 253

Will treat you to a pleasant beep when the task finishes.


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Selasa, 27 Desember 2011

Unix Tip: NO WRITES TO PASSWORD FILE

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3609 - December 27, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


NO WRITES TO PASSWORD FILE

The normal mistake in a fit of quick
panic often by users is to be looking
at the /etc/passwd file and see that
there is "READ" access to the world
or "644" on the file.

Time and time again when they first
discover having root access they
change the permissions to:

chmod 000 /etc/passwd

D O N O T D O T H I S ! ! !

chmod 644 /etc/passwd

Is just fine!


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Senin, 26 Desember 2011

Unix Tip: EAT YOUR PERL PIE

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3608 - December 26, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


EAT YOUR PERL PIE

Mom always sed, "eat your Perl pie"!

A common task is to substitute
text strings within one or
more files. The sed string
substitution command is often
used to accomplish this, where
sed is passed a file name, the
string substitutions are written
to another file, and then that
file is copied over the first
file to effect the changes
desired in the original.

This approach has some inherent
problems. The command syntax is
lengthy and cumbersome, a
secondary file is created
which involves additional disk
I/O, and when that file is
copied or moved back over the
first one, permissions problems
and file ownership problems can
be created. If your umask
doesn't match the permissions of
the original file, then the
permissions of the final modified
file will be different than those
of the original. Likewise,
default ownerships and group
names are imposed on the temporary
copy, and if one is not careful,
when the temporary copy is written
back to the original file, these
can destroy the original file's
ownership and group information.

A much better way to accomplish
text substitution within a file or
group of files is to use the
"perl pie" approach, as shown here
on file foo:

perl -p -i -e 's/original text string/replacement string' foo

The above command will replace the
first instance of "original text
string" with "replacement string"
in file foo. If you want to
perform this globally within the
file, add the /g global specifier
at the back end, as follows:

perl -p -i -e 's/original text string/replacementstring/g' foo

To act on several files in the
same directory, change the file
specification as needed, by
specifying foo*, *, or whatever
you need.

Note that perl uses the exact
same syntax for the actual string
substitution portion of the command
as sed does, which makes the command
syntax easy to remember. However,
perl performs the entire operation
on the file without the use of any
secondary files needing to be
created, which eliminates the extra
disk I/O and the potential
permissions and ownership issues.

This tip generously supported by: jem@postfive.rose.hp.com


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Minggu, 25 Desember 2011

Unix Tip: CHANGING A PRINT QUEUE IP

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3607 - December 25, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


CHANGING A PRINT QUEUE IP


To change the IP address of
a print queue in HP UX 10.20
(and maybe others), go to
/var/spool/lp/interface.
Edit the file with the same
name as the print queue and
change parameter PERIPH to
the new IP address.

For example, to change
printer_1 from 127.0.0.2 to
127.0.10.10, edit
/var/spool/lp/interface/printer_1
and change the line PERIPH=127.0.0.2 to
PERIPH=127.0.10.10.

Disable and enable printer_1,
and jobs sent to printer_1 will
go to the new IP address.


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Sabtu, 24 Desember 2011

Unix Tip: MOVING FILES AROUND

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3606 - December 24, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


MOVING FILES AROUND

Here is another way to move
files around.

Sometimes you find yourself
wanting to move a bunch of
files into a new directory
that is to be created in the
current working directory.

Rather than using a temporary
directory, or grep and variable
substitution; use a subshell:

$ ( \ls; echo dir; mkdir dir ) | xargs mv

The trick is in using a subshell
to run a number of commands
_before_ the output is piped to
xargs. This idiom is also useful
for plenty of other applications.


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Jumat, 23 Desember 2011

Unix Tip: GOOD TIME FOR CRON

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3605 - December 23, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


GOOD TIME FOR CRON

At a US government site, most of
the maintenance cron jobs ran at
noon, because testing showed that
to be the least used time in any 24-hour
weekday. Some users were around at all
hours of the night, but everyone went to
lunch!

Tibor Pollerman


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Kamis, 22 Desember 2011

Unix Tip: PATHS EASIER TO READ

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3604 - December 22, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


PATHS EASIER TO READ

Am I the only one who finds the

% echo $PATH

and

% echo $LD_LIBRARY_PATH

unreadable? Try this to make
for something thats much easier
to read:

echo $PATH | tr ":" "\n"


This tip generously supported by: ng@clubgeek.net


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Rabu, 21 Desember 2011

Unix Tip: KEEP THAT USER OUT!

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3603 - December 21, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


KEEP THAT USER OUT!

Ever get into one of
those pesky admin wars
or need to keep the
developers off of your
system for a few minutes
without taking the system
to single user mode?

This nasty little script
will do the trick.

[root@foo /]# while true
> do
> kill -9 $(ps -aux |grep username | awk '{ print $2 }' )
> sleep 2
> done

This can make you the life
of the party (At work)

Don Cooley
Unix Systems/Security Admin
Wellogix Inc.
dcooley@wellogix.com


This tip generously supported by: dcooley@wellogix.com


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Selasa, 20 Desember 2011

Unix Tip: GETTING IPs FROM IFCONFIG

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3602 - December 20, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


GETTING IPs FROM IFCONFIG

You can use ifconfig to lookup
IP addresses bound to your box.
If you do not want to search the
output from ifconfig, use the
following command to get just
the IP listing.

ifconfig | awk '/inet/{print $2}' | awk -F: '{print $2}'

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Senin, 19 Desember 2011

Unix Tip: PING THE HOST TABLE

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3601 - December 19, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


PING THE HOST TABLE

There's no need to grep and
pipe the output into awk
(you can "grep" with awk.)

awk '/^[0-9]/{print $1}' /etc/hosts |xargs -l ping -c 1 $1


This tip generously supported by: bmaclean@silverplatter.com

And another:

awk '/^[^#]/ {system("ping -c 1 "$1)}' < /etc/hosts


This tip generously supported by: maddox@xmission.com


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Minggu, 18 Desember 2011

Unix Tip: USES FOR AWK

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3600 - December 18, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


USES FOR AWK

If you have a server
with alot of filesystems
on it (oracle/SAP
environments) then this
little awk command can
come in useful. It can
obviously be used in many
other situations also. In
this example, the file
structure is /oracle/PRD/xxxx.

awk '/PRD/{ print "umount " $3 }' /etc/vfstab | /sbin/sh

If you run it without
piping it to 'sh', then it
will show you what the command
will do. You can replace the
'umount' with whatever command you
like. It's a quick and easy though.

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Sabtu, 17 Desember 2011

Unix Tip: PERL FIND AND REPLACE

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3599 - December 17, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


PERL FIND AND REPLACE

In UNIX environment, the
following combination of perl
and find will serch for a
particular file and replace
the occurence of a particular
string with another string in
that file. This will also
work for multiple files and
directories. The find
command finds the file and
the perl script replaces
old string with the new one.


At the command prompt give
this command:

# perl -pi -e 's/<old string>/<new string>' `find . -name "<file name>"`

NB: Perl should be in the
path and the general regular
expression rules apply while
using special characters
for eg / or .


This tip generously supported by: pandpr@dh.cit.alcatel.fr


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Jumat, 16 Desember 2011

Unix Tip: BE ALARMED

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3598 - December 16, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


BE ALARMED

Name the following script
alarm. Make it executable
and them invoke it as:

% alarm 10 "Time for tea"

After 10 seconds machine will
echo Time for Tea
and beep five times.....

---------------

#! /usr/bin/ksh
# alarm program
# displays a message at
if [ $# -ne 2 ]
then
echo "USAGE : $0 seconds message"
exit 1
fi

time=$1
mesg=$2
signal_alarm()
{
sleep $time
banner $mesg
for i in 1 2 3 4 5 6 7 8 9
do
if [ $i -eq 2 -o $i -eq 4 -o $i -eq 6 -o $i -eq 8 ]
then
sleep 1
else
tput bel
fi
done
}

case $1 in

[0-9][0-9][0-9] | [0-9] | [0-9][0-9] )signal_alarm &;;
*)echo Seconds range is from 0 to 199;;

esac


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Kamis, 15 Desember 2011

Unix Tip: NUMBERING A FILE

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3597 - December 15, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


NUMBERING A FILE

Ever want line numbers
appended to a file. Here
is a short script.

awk '{no=no+1; printf"%d : %s", no, $0}' filename > filename.out

Another shorter but not
necessary elegant method
is:

grep -n . filename > filename.out

filename is the original file
filenmae.out is the file with
line numbers appended at the
beginning of each line


This tip generously supported by: pradeep@unixguru.zzn.com


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Rabu, 14 Desember 2011

Unix Tip: BACKING UP FILES

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3596 - December 14, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


BACKING UP FILES

Ever needed to backup all
of your configuration files
in one fail swoop?

Using an editor create a
file:

vi configlist

Enter the full path of the
files needed to backup.

/etc/passwd
/etc/inetd.conf
/etc/hosts/allow
/etc/hosts.deny
and so on until you have a full list of files.
Save the file and quit

:wq!

Compress the files using tar:

tar cvfzT /tmp/backup.tar.gz configlist
tar: Removing leading `/` from absolute path names in the archive
etc/passwd
etc/inetd.conf

WARNING! This file contains some files that could only be read by a
limited number of users. Store it carefully so only the Administrator can
access it.

Check "man tar" on your flavor,
the "z" and "T" options are
not available on all flavors
of unix.

This tip generously supported by: darren.mallett@tradermedia.co.uk


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Selasa, 13 Desember 2011

Unix Tip: SNEAK THE EDUCATION IN

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3595 - December 13, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


SNEAK THE EDUCATION IN

During these times of tight
budgets. It is hard to
convince the boss to pay for
a class or conference. When
being quoted for a new
system ask the vendor to
toss in some education
classes into the price of
the quote.

There are 2 benefits to this:

1) Education in most
IT organizations comes out of
a different budget so you
are saving the company money
since that you don't need to
use the funds from that pool
of money.

2) If you need to negotiate
the price of the quote or tell
the vendor you are taking it
to bid against a competitor;
educational classes are like
dessert at a restaurant. They
sometimes can toss it in for
free to keep your business.

But either way, the goal is
to get the classes on the
quote!

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Senin, 12 Desember 2011

Unix Tip: MANIPULATE MULTIPLE FILES

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3594 - December 12, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


MANIPULATE MULTIPLE FILES

If you have a directory with
large number of files and you
want to rename or copy or
process it, here is a simple
way to do it;

# for temp in *
> do
> echo cp $temp $temp.org >> t.txt
> done

You can change the copy command
to what ever that you need to
do. This will create a file
tmp.txt with all the files
listed in the current working
directory and insert a line
into the file tmp.txt as;

cp filename filename.org


This tip generously supported by: tyl@computer.org


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Minggu, 11 Desember 2011

Unix Tip: UNDO HP SECURE PASSWORD FACILITY

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3593 - December 11, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


UNDO HP SECURE PASSWORD FACILITY

If you have run command
pwconv to convert to secure
password and later want to undo
it, here it how;

/etc/tsconvert -r

This only for HP Unix and no
man pages for this.


This tip generously supported by: tyl@computer.org


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Sabtu, 10 Desember 2011

Unix Tip: COMMENT OUT MULTIPLE LINES

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3592 - December 10, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


COMMENT OUT MULTIPLE LINES

Ever wanted to comment out
multiple lines of code while
writing shell
scripts in vi, but didn't want
to pound your keyboard for half
an hour doing it?

(I#Escape j.j.j.j. = carpal tunnel)

Here's the nerdy way to do it:

:.,+N-1 s/^/#/g

Where N-1 is the number of lines
minus one that you want to comment
out, and s/^/#/g is the regular
expression (the pattern between the
first two slashes is what you want
to replace, in this case the
beginning of the line, and the
pattern between the last two slashes
is what you want to replace it with).

For example, if you're a bad
coder like me and want to comment
out 500 lines of code, you would do:

:.,+499 s/^/#/g

This tip generously supported by: maddox@xmission.com


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Jumat, 09 Desember 2011

Unix Tip: HOW MUCH SOLARIS MEMORY?

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3591 - December 9, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


HOW MUCH SOLARIS MEMORY?

To determine the amount of main memory on Solaris:
1) /usr/platform/sun4u/sbin/prtdiag
2) wsinfo
3) '/usr/sbin/prtconf | grep -i memory'


This tip generously supported by: M.Nithyanandham@blr.spcnl.co.in


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Kamis, 08 Desember 2011

Unix Tip: EDITING OF LARGE FILES

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3590 - December 8, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


EDITING OF LARGE FILES

Ever failed to open a very large
file for editing in vi. Just try
this tip:

Suppose you want to make changes
in top 500 lines of a 100 line file
abc.txt.

tail +500 abc.txt > tail.txt
head -500 abc.txt > head.txt

Edit file head.txt by opening in
a vi editor.

Now append file tail.txt to
head.txt by:

cat tail.txt >> head.txt
mv head.txt > abc.txt
rm head.txt tail.txt


This tip generously supported by: akash@cadence.com


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Rabu, 07 Desember 2011

Unix Tip: LEAKING MEMORY?

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3589 - December 7, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


LEAKING MEMORY?

Do you want to know the list
of memory leak detecting tools:

http://www.cs.colorado.edu/homes/zorn/public_html/MallocDebug.html


This tip generously supported by: M.Nithyanandham@blr.spcnl.co.in


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Selasa, 06 Desember 2011

Unix Tip: TRUSS THE PID.....

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3588 - December 6, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


TRUSS THE PID.....

To check the system calls and signals
coming into and going out of a
process use /usr/bin/truss.

i.e. truss pid


This tip generously supported by: bareddy_sm@yahoo.com

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Senin, 05 Desember 2011

Unix Tip: VERIFY AFTER VACATIONS

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3587 - December 5, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


VERIFY AFTER VACATIONS

Be sure to check all vital systems and
processes once returning froma vacation.

Don't ignore your log files or backup
reports. You may have alot of email
from automated jobs. READ ALL OF THEM!


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Minggu, 04 Desember 2011

Unix Tip: VERIFY AFTER VACATIONS

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3586 - December 4, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


VERIFY AFTER VACATIONS

Be sure to check all vital systems and
processes once returning froma vacation.

Don't ignore your log files or backup
reports. You may have alot of email
from automated jobs. READ ALL OF THEM!


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Sabtu, 03 Desember 2011

Unix Tip: FIND AND EDIT IN ONE

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3585 - December 3, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


FIND AND EDIT IN ONE

Have You Ever found a need to find a file for a particular pattern and then
edit the same ??

Here is an easiest way....

At the UNIX prompt,
Just type:

vi `find . -name "*" -exec grep -l "pattern" {} \; -print`

Where "pattern" is the string to be searched.


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Jumat, 02 Desember 2011

Unix Tip: CARROTS ARE GOOD FOR YOU

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3584 - December 2, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


CARROTS ARE GOOD FOR YOU

Most often when we try to execute a command at the shell we do
some mistakes like missing out a char or misspelling it.
Here is a easy way of correcting the mistake without having
to type the entire command again!.

In the below command "name" has been misspelled as "naem"

$ find . -naem "*.txt" -print
find: invalid predicate `-naem'

The above command would be valid if we replace "em" (in naem)
to "me"( to have name ). Use carrots to make this change

$ ^em^me^
find . -name "*.txt" -print

This technique works well with bash and csh.

This tip generously supported by: desikann@future.futsoft.com


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Kamis, 01 Desember 2011

Unix Tip: WHERE ARE THOSE PARENTHESES?

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3583 - December 1, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


WHERE ARE THOSE PARENTHESES?

Do you ever lose your way in multiple levels of parentheses
or braces? If you program in Perl or C, you know what I
mean. Let the vi "%" command help you. Move the cursor to
a parenthesis or brace and type %. vi will move the
cursor to the corresponding character. Hit % again and vi
will return to the original parenthesis or brace.

For extra power, issue "/{" to find the first open brace.
Hit "%" twice to find the corresponding brace and return.
Hit "n" to find the next open brace. This allows you to
zip through the file checking your program structure.

It makes you feel sorry for Windows-based editors!


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Rabu, 30 November 2011

Unix Tip: GREP TEXT NOT BINARY

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3582 - November 30, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


GREP TEXT NOT BINARY

In some directories such as /etc you have a mix of file types.
You may want to grep out a string from one of the files but
don't want to worry about the binaries, data, etc. To accomplish
this, searching only text files do this:

grep <string> `file * | egrep 'script|text' | awk -F: '{print $1}'`


This tip generously supported by: Richard.place-eds@eds.com

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Selasa, 29 November 2011

Unix Tip: GET THE HIDDEN FILES

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3581 - November 29, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


GET THE HIDDEN FILES

A safe way of grabbing all "hidden" files is to use '.??*'
rather than '.*' since this will only match 3 or more
characters. Admittedly, this will miss any hidden files
that are only a single character after the ., but it
will always miss '.' & '..', which is probably more
important...

This tip generously supported by: leopard@midwinter.com

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Senin, 28 November 2011

Unix Tip: FINDING A STRING

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3580 - November 28, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


FINDING A STRING

How to find a string somewhere on the system. Many times we are
called to search for a string, but we have no idea where it may
be lurking. Judicious use of the find and grep commands will
make you a hero with your co-workers.

# find . -type f -exec grep "string or options" /dev/null {} \;

Normally using only:
# find . -type f -exec grep "string/options" {} \;

Produces the target string, but you will have no clue as to where
it is located, making this almost as frustrating as using windoze!
Remember when grep'ing against multiple files the filename will be
listed before the match.

$ grep there *
foo:I found the target here
bar:You are there

In our find command we use /dev/null as a file to search against, since
we know the search will always fail if the string is found in "{}" there
filename is printed. To borrow from a famous quote:
"Pretty tricky sis!"

This tip generously supported by: james_b_horwath@glic.com


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Minggu, 27 November 2011

Unix Tip: RANDOM LINES FROM A FILE

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3579 - November 27, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


RANDOM LINES FROM A FILE

A easy way to retrieve random lines from a text file:

perl -e '$count = 10; @line = <>; for (1..$count) { print $line[int rand @line] }'

example:
% cat /etc/passwd | perl -e '$count = 10; @line = <>; for (1..$count) { print $line[int rand @line] }'

This tip generously supported by: abend@110.net


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Sabtu, 26 November 2011

Unix Tip: EXTRACT THAT LAST FIELD

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3578 - November 26, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


EXTRACT THAT LAST FIELD

You can use 'cut' to extract the last field of a line if you know
how many fields there are, eg:

field=`cut -d: -f8 file`

But if you don't know the maximum number of fields or the number
of fields per line are not consistent, awk can come to the rescue.
awk has the inbuilt variable NF for the number of fields. By using
this variable we can use it to extract the last field by using:

field=`awk -F: '{print $NF}'`

or you can use calculations to retrieve any field relative to the last field.
For example to retrieve the second last field, use:

field=`awk -F: '{print $(NF-1)}'`


This tip generously supported by: peters@ginini.com.au


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Jumat, 25 November 2011

Unix Tip: FULL OF FILESYSTEM INODES

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3577 - November 25, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


FULL OF FILESYSTEM INODES

We recently had a problem where a file system had 100% inode usage.
Unfortunately there isn't an easy way to search for directories with
a lot of files in them (1 file = 1 inode). And if the files are small,
you can't rely on du to help you out.

Here is a find command that will print all the directories in the
current filesystem, with the number of files (inodes) in that directory.

find . -xdev -type d -exec /bin/echo -n {} \; -exec sh -c "ls {} | wc -l" \;

This tip generously supported by: rickb@cmhcsys.com

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Kamis, 24 November 2011

Unix Tip: FORGET THE CRONTAB MAN

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3576 - November 24, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


FORGET THE CRONTAB MAN

For some reason many admins forget the field order of the
crontab file and alway reference the man pages over-and-over.
Make your life easy. Just put the field definitions in
your crontab file and comment (#) the lines out so the
crontab file ignores it.

#minute (0-59),
#| hour (0-23),
#| | day of the month (1-31),
#| | | month of the year (1-12),
#| | | | day of the week (0-6 with 0=Sunday).
#| | | | | commands
0 2 * * 0,4 /etc/cron.d/logchecker

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Rabu, 23 November 2011

Unix Tip: POWER OF BACKQUOTES

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3575 - November 23, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


POWER OF BACKQUOTES

Backquotes are the most powerful things in Unix. More than one
Unix commands can be run simultaneously on the prompt.
In csh,

% find . -name "*.txt" -print

gives the path & names of the files with extension ".txt" in
current directory and its subdirectories. If you want to open
these files in vi together then

% vi `find . -name "*.txt" -print`

Similarly,

% find . -name "*.txt" -print
<listing of all txt files. in current directory/sub-dirs>
% vi `!!`

this will open all those files in vi listed by find command.


This tip generously supported by: dhruvm@duettech.com

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Selasa, 22 November 2011

Unix Tip: PING THE HOST TABLE

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3574 - November 22, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


PING THE HOST TABLE

Here is a quick way to ping all the hosts in your host table.
NOTE: Just make sure that there are no blank lines in it, and
verify the ping command on your system exist after one ping. Your
mileage may differ slightly.

$ grep -v "#" /etc/hosts | awk '{print $1}' | while read host
> do
> ping -c 1 $host
> done

Or script it:

#!/bin/sh
grep -v "#" /etc/hosts | awk '{print $1}' | while read host
do
ping -c 1 $host
done


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Senin, 21 November 2011

Unix Tip: A SHAMELESS PLUG

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3573 - November 21, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


A SHAMELESS PLUG

The Best Tip I can give you right now is to pick up a copy of
UNIX HINTS AND HACKS By the Creator of UGU.

It is available at Barnes & Nobles, Borders, and Technical book stores.

Some of the past tips from UGU can also be seen in the book.

http://www.amazon.com/exec/obidos/ASIN/0789719274/unixguruuniverse

Here are what some UGU'ers are saying about the book:
-----------------------------------------------------
mikec@sficorp.com from Green Bay, WI , August 21, 1999
FANTASTIC - FIVE STARS *****
This is a great book for those looking for quick solutions
to common real work scenarios. If you are responsible for
Unix (yes including Linux) systems this is one book you have
to have. For coding solutions the book usually shows both shell
script and perl examples for the same problem

jbaduria@hotmail.com from San Mateo, CA, USA , August 19, 1999
GREAT BOOK!! - FIVE STARS *****
Finally a book that deals with the real things that most UNIX
system administrators face. It saves you the trouble of finding
out things only after you face it. You could save yourself
a lot of time solving problems that could have been avoided
by reading this book. With the price nothing beats it. Not even
those $30+ books.

link2000@n-link.com from Tx, Usa , June 25, 1999
GREAT BOOK - FIVE STARS *****
This is a great book. It has many tricks that are geared toward real
world experience that are not covered in any other book I have seen.
I especially liked the section geared toward getting your first
job as an system admin. It is one book worth buying. For all kinds
of information for less than 15 dollars how could you go wrong.


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Minggu, 20 November 2011

Unix Tip: REPETITIVE TASKS WITH XARGS

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3572 - November 20, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


REPETITIVE TASKS WITH XARGS

Save yourself a lot of typing when you have to perform repetitive
commands on a list of files. Put the list of files in a text file
with one file per line ie: find . -name version.C > filename
Then have xargs build a command line for each file in the list as
follows:

cat filename |xargs -n 1 cp anotherfile

This will copy anotherfile over all the files listed in
filename one at a time until the end of filename is reached.


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Sabtu, 19 November 2011

Unix Tip: Suppose we want to check whether the web server is running or

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3571 - November 19, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


Suppose we want to check whether the web server is running or
not, but we don't have any browsers ( lynx, IE, Netscape ...),
then there is a simple way of doing that. Just telnet to that
machine on the http port ( port no 80 in general).

% telnet <ip addr> <port no>

And then, say "get /" (without quotes). If the webserver is running,
it displays the HTML script of the homepage or basic info and closes the
connection to the remote host.

% telnet yahoo.com 80
Trying 204.71.200.245...
Connected to yahoo.com.
Escape character is '^]'.
get /
HTTP/1.0 302 RD
Location: http://www.yahoo.com/

Connection closed by foreign host.

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Jumat, 18 November 2011

Unix Tip: CTRL-D ANOTHER USE

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3570 - November 18, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


CTRL-D ANOTHER USE

Many Unix Admins use the C shell as their interactive shell.
An often used feature of Csh is file completion - initiated
with 'set filec'. It allows the Csh user to type in partial
file names, and then press escape to get them completed where
possible. A little known side effect of this is that
Control-D (^D) will now generate file listings in the middle of
command lines.

Example 1: (where @ is a space)
host > @^D
Lists the current directory

Example 2:
host >ln -s /usr/^D
Lists the /usr directory

host >tar cvf /dev/nrtape /usr/m^D
Lists all m* files in the /usr directory

In each case, after the listing, you get a new command line and are
placed at the last point of edit.

Very handy if you you know what you wanted to do but forgot what you
wanted to do it with!


This tip generously supported by: mikal.dunn@halliburton.com


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Kamis, 17 November 2011

Unix Tip: HIDE THOSE FILES

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3569 - November 17, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


HIDE THOSE FILES


If you want to have some hidden directories on your server (warez etc.)
then make a directory with permission 111.


% chmod 111 foo/

All the contents will become hidden:

% cd foo
% ls -al
Cannot access directory .: Permission denied

The directory will have to opened back up (755) in order to see or access
the files or the directory. To remove the directory and its contents, it
will also need to have the permissions opened.


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Rabu, 16 November 2011

Unix Tip: TCSH AND RMSTAR

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3568 - November 16, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


TCSH AND RMSTAR

tcsh has a nice built in variable:
set rmstar

Whenever you type the command:

% rm *

The shell will ask you to confirm, this prevents you from deleting
all your files accidentally.

Add "set rmstar" in you .cshrc file for your own benefit.

--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Selasa, 15 November 2011

Unix Tip: PERFORMANCE OF CROND TASKS

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3567 - November 15, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


PERFORMANCE OF CROND TASKS

A good tip for getting better performance in crond tasks
is choosing a better time for launching them.

If the process that we want to launch needs few time,
but can overload the system easily, you can launch
the task in hours that the work is busy and -and HERE
is the tip- in strange minutes. That's why lots of
people launch their crons at midnight, but
nobody uses to do it at 00:13, in example.

That tip can obtain his best in hourly-launched
tasks. If that kind of tasks are launched all at
the same time, the system will overload without
any use. You can delay that kind of tasks (one
at 13th minute, other at 17th minute,other at
27th minute...) and obtain better performance
without work. That will avoid overloading caused
by launching several tasks at the same time.

The best is that administration tasks do
not overlap, but this is not always possible.
If you can do it, it's better you do it.

Using nice is also a good idea.

But the best is making a log of the uptime during
a week. You can be surprise, because all the staff
of a department of a firm use to do the coffee-break
at the same time; it's the perfect time for making
some administrative tasks. :-)
But do not clear the forbidden extensions -the famous
find /home -name core -exec \{\} \; and other stuff
like tmps, ~s and so on- of the system
at work time, or you will have a queue of staff people
very, very angry knocking at your door.

This tip generously supported by: irbis@activanet.es


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Senin, 14 November 2011

Unix Tip: SHELL SCRIPTING A SQLPLUS SCRIPT

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3566 - November 14, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


SHELL SCRIPTING A SQLPLUS SCRIPT


Here is a tip on how to run sqlplus scripts within a shell script.
It is an example of how to pass database values into shell variables
and to make shell scripts more dynamic. This maybe elementary to some
folks but hope it helps others.....Here is the syntax:

#!/bin/sh
dummyvar=`sqlplus -s username/password <<end
set pagesize 0 feedback off ver off heading off echo off
select sysdate from dual;
exit;
end`
echo "system date is " $dummyvar

Minggu, 13 November 2011

Unix Tip: I SEE YOU WITH FUSER

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

UNIX GURU UNIVERSE
UNIX HOT TIP

Unix Tip 3565 - November 13, 2011

http://www.ugu.com/sui/ugu/show?tip.today

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


I SEE YOU WITH FUSER

In System V, you can use the following command to see who is accessing
a particular file system:

fuser <file system>

For example, to see who is accessing the /cdrom directory:

fuser /cdrom

This command is useful if you wish to unmount a file system but the system
is unable to do so because it is being used.


This tip generously supported by: anthony-leong@usa.net


--------------------------------------------------------------------------
To Subscribe: http://www.ugu.com/sui/ugu/show?tip.subscribe
To Unsubscribe: http://www.ugu.com/sui/ugu/show?tip.unsubscribe
To Submit A Tip: http://www.ugu.com/sui/ugu/show?tip.today

==========================================================================
DISCLAIMER: All UNIX HOT TIPS ARE OWNED BY THE UNIX GURU UNIVERSE AND ARE
NOT TO BE SOLD, PRINTED OR USED WITHOUT THE WRITTEN CONSENT OF THE UNIX
GURU UNIVERSE. ALL TIPS ARE "USE AT YOUR OWN RISK". UGU ADVISES THAT
ALL TIPS BE TESTED IN A NON-PRODUCTION DEVELOPMENT ENVIRONMENT FIRST.

Unix Guru Universe - www.ugu.com - tips@ugu.com - Copyright 1994-2001
==========================================================================

Your Ad Here
Free Automatic Backlink Free Auto Backlink Free Auto Backlink Free Auto Backlink Free Auto Backlink Free Auto Backlink Free Auto Backlink Free Auto Backlink Free Auto Backlink Free Auto Backlink